BURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
德国
温度模拟器可选择 Pt100、Pt200、Pt500、Pt1000、Ni 100 和 Ni 1000 传感器,温度范围为 -200 °C 至 +850 °C。温度可通过键盘或数据接口输入。相应的电阻值以两线、三线或四线方式显示在输出插座上。 电阻十进制可直接选择 1 Ω 至 1.2 MΩ 的电阻。根据欧姆值的不同,分辨率可低至 0.00001 Ω。所选电阻可以采用两线制或四线制技术。 LCD 显示屏提供有关所选电阻或温度、传感器类型和控制状态的信息。 特点 — 电阻范围从 1.00000 Ω 到 1.200000 MΩ — 误差公差 0.005 — 温度系数 < 1 ppm/K — 模拟 RTD(铂、镍)温度传感器 — 误差容限 0.02 °C — 2 线、3 线、4 线连接 — USB/RS232(可选 IEEE488/以太网)
请求报价HAN SONG M&T
韩国
[Product Description] S-PRO series is mainly used for cutting difficult-to-cut materials such as stainless, titanium, nickel and hastelloy in the aerospace field. A deep chip evacuation space of the S-PRO helps to cut difficult-to-cut materials, which facilitates chip evacuation and provides excellent surface finish. [Product Specification] Flat end mill : D1 ~ D20 Ball end mill : D3 ~ D20 C/R end mill : D1 ~ D20 [Product Model] Flat : 4SUE, 4SUEA Ball : 4SUB C/R : 4SUR, 4SURA [Product Use] * The cutting edge type of S pro series is unequal flute and it is suitable for cutting difficult to cut materials like alloly steels, stainless steels, Titianium, Inconel etc. * 4SURA, 4SUEA are specialized to cut Inconel. * Strong wear-resistance by adapting S-pro coating.
请求报价HAN SONG M&T
韩国
[Product Description] S-PRO series is mainly used for cutting difficult-to-cut materials such as stainless, titanium, nickel and hastelloy in the aerospace field. A deep chip evacuation space of the S-PRO helps to cut difficult-to-cut materials, which facilitates chip evacuation and provides excellent surface finish. [Product Specification] Flat end mill : D1 ~ D20 Ball end mill : D3 ~ D20 C/R end mill : D1 ~ D20 [Product Model] Flat : 4SUE, 4SUEA Ball : 4SUB C/R : 4SUR, 4SURA [Product Use] * The cutting edge type of S pro series is unequal flute and it is suitable for cutting difficult to cut materials like alloly steels, stainless steels, Titianium, Inconel etc. * 4SURA, 4SUEA are specialized to cut Inconel. * Strong wear-resistance by adapting S-pro coating.
请求报价结果来自
镍 - 進出口搜索结果的数量
3 产品企业类别