Nodular cast iron - 進出口

Bainitic Nodular Cast Iron Roll Introduction Bainitic nodular cast iron roll is a kind of spheroidal graphite iron roll, which is known as ductile iron roll and is a roll made by spheroidizing the molten iron with magnesium and pouring it into the sand-lined cold type. Due to the spheroidizing treatment, the graphite carbon inside the cast iron is changed from flake to spheroid, which eliminates the phenomenon of graphite tip stress concentration caused by flake graphite, which significantly improves the strength of cast iron, similar to the cast steel roll, but the abrasion resistance is much higher than the cast steel roll. There are three types of nodules of magnesium, cerium, and calcium, and magnesium is commonly used. Spheroidal graphite iron roll can be applied in open-rolling mills, roughing mills and rolling mills before finishing rolling on various sections and plates. When the finished roll bears a large load, it is best to use a ductile iron roll with a casting groove,

Pearlitic Nodular Cast Iron Roll Pearlitic nodular cast iron roll is a kind of spheroidal graphite iron roll, which is known as ductile iron roll and is a roll made by spheroidizing the molten iron with magnesium and pouring it into the sand-lined cold type. Due to the spheroidizing treatment, the graphite carbon inside the cast iron is changed from flake to spheroid, which eliminates the phenomenon of graphite tip stress concentration caused by flake graphite, which significantly improves the strength of cast iron, similar to the cast steel roll, but the abrasion resistance is much higher than the cast steel roll. There are three types of nodules of magnesium, cerium, and calcium and magnesium are commonly used. Spheroidal graphite iron roll can be applied in open-rolling mills, roughing mills and rolling mills before finishing rolling on various sections and plates. When the finished roll bears a large load, it is best to use a ductile iron roll with a casting groove,

The cast iron roll is produced by a horizontal centrifugal casting process with high-speed steel as the work layer and nodular iron as the core. The material of centrifugal casting iron roll contains plenty of alloying elements such as Mo, Ni, Cr, etc. The high hardened eutectic carbides & second carbides, evenly distributed in tempered martensitic matrix, make the wear and thermal cracking resistance very excellent. Besides, the resistance to surface roughing is also good. In a condition of hot rolling, the contact points between steel strip and the work rolls can form a thin adherent oxide film on the roll surface, which plays a good role in the wear features and the quality of the strip surface. The main application is as a working roll for hot-rolled strip leveling rack and rack of high-speed wire mill.

The alloy ductile cast iron roll is made of acicular nodular cast iron mixing with nickel, chromium, molybdenum. It can be used in various blanking rolling mills for section steel, bar, wire rod and narrow strip, roughing mills, work roll for seamless steel tube, intermediate stand and finishing stand for section steel, bar, wire rod and narrow strip and rolling mills before finishing rolling for various sections and plate steels. The finished spheroidal graphite iron roll can also be used in the case of a low load. When the finished roll is subjected to a heavy load, it is preferable to use as a nodular cast iron chill roll with high strength and wear resistance. The TINVO mill rolls conform to the standards of ISO, GB, ASTM, DIN, and JIS, high quality with the best price guaranteed Alloy spheroidal graphite iron roll has a lot of usage following as: Blooming roll rack of rolling mills for section steel, bar, wire rod and narrow strip, Rolling mill work roll for seamless steel tube

Adamite Roll Introduction The semi-steel adamite roll is casted as a whole and there is no weak interface in compound casting roll, thus it has a better capacity, strength and toughness than cast iron roll. This kind of mill rolls can be used as work roll, back-up roll and vertical roll for large-class and medium-class rough rolling mill and intermediate rolling mill of section steel, wire rod, rail beams, steel billet, hot rolling steel strip. Most of the adamite steel rolls are produced by the static integral casting method. It must be subjected to high-temperature diffusion annealing. Generally, adamite rolls for steel rolling mills are required to control the total amount of non-metallic inclusions below 0.05%. The centrifugal composite semi-steel back-up rolls are made of adamite steel material, the body and neck of the rolls are made of nodular cast iron, and they have been successfully used in hot-rolled strip steel finishing mill.