轧制 - 進出口

如果SPIROL的标准隔套无法满足您的应用要求，SPIROL的应用工程部将协助您设计出满足您特定需求的管状组件。 SPIROL擅长使用较便宜的辊压成型产品取代昂贵的机加工和冷成型组件。SPIROL凭借专有制造技术能够经济高效地生产特殊管材，可满足相对高成本替代品的性能要求。

Adamite Roll Introduction The semi-steel adamite roll is casted as a whole and there is no weak interface in compound casting roll, thus it has a better capacity, strength and toughness than cast iron roll. This kind of mill rolls can be used as work roll, back-up roll and vertical roll for large-class and medium-class rough rolling mill and intermediate rolling mill of section steel, wire rod, rail beams, steel billet, hot rolling steel strip. Most of the adamite steel rolls are produced by the static integral casting method. It must be subjected to high-temperature diffusion annealing. Generally, adamite rolls for steel rolling mills are required to control the total amount of non-metallic inclusions below 0.05%. The centrifugal composite semi-steel back-up rolls are made of adamite steel material, the body and neck of the rolls are made of nodular cast iron, and they have been successfully used in hot-rolled strip steel finishing mill.

Forged steel rolls have toughness, surface hardness uniformity and fatigue resistance and widely used to the cold rolling mill. The mill rolls are made from steel ingots by forging. Forging can solve metallurgical defects such as loose and shrinkage holes in the ingot, and crush the coarse cast structure to obtain a high-quality roll with dense structure and uniform composition. The production process of forged roll includes smelting, ingot casting, forging, post-forging heat treatment, rough processing, final heat treatment and finishing. The rolls are heat-treated differently depending on the material and application. They are mainly used as strip rolling mill work roll and backup roll, H-type steel universal–shaft, High-speed roll(HSS roll), Cr4 steel backup roll, Cr5 forged steel roll, 86CrMoV7 forged steel roll, 42CrMo forged steel roll, MC2, MC3, MC5, MC6 forged steel roll, etc.

The alloy ductile cast iron roll is made of acicular nodular cast iron mixing with nickel, chromium, molybdenum. It can be used in various blanking rolling mills for section steel, bar, wire rod and narrow strip, roughing mills, work roll for seamless steel tube, intermediate stand and finishing stand for section steel, bar, wire rod and narrow strip and rolling mills before finishing rolling for various sections and plate steels. The finished spheroidal graphite iron roll can also be used in the case of a low load. When the finished roll is subjected to a heavy load, it is preferable to use as a nodular cast iron chill roll with high strength and wear resistance. The TINVO mill rolls conform to the standards of ISO, GB, ASTM, DIN, and JIS, high quality with the best price guaranteed Alloy spheroidal graphite iron roll has a lot of usage following as: Blooming roll rack of rolling mills for section steel, bar, wire rod and narrow strip, Rolling mill work roll for seamless steel tube

Chilled Cast Iron Roll Introduction There is no free graphite in the working layer of alloy chilled cast iron roll, it is featured as high hardness, good wear-resistance, micro metallographic micro-structure is fine pearlite and carbides. Application The finishing mill for section steel, wire rod, strip, thin plate and bar; The pre-finishing stands of high speed wire; With roll ring of stretch reducing mill for seamless steel tube.

ATON Wire 是固定式尺寸测量系统，用于连续监控轧机和拉丝机的生产情况。为了满足具有挑战性的投资回报率要求，NEXTSENSE 以合理的价格提供高精度测量仪器。 ATON Wire 测量仪使用两轴消隐传感器测量圆形轮廓的直径和椭圆度，测量范围为 50mm，精度为 5μm。根据材料温度和环境条件，有三种产品版本可进行选择。测量系统可在线显示结果。在第一行中，显示批次的批次 ID 和钢坯或线圈计数器。在下一行中，以大数字显示两个轴的当前值和计算出的椭圆度值。在这些数字的每个数字下，显示基于当前线圈的几个统计值：最大值、平均值、最小值、标准偏差、Cp 和 CpK。 系统版本：ATON Wire Cold、ATON Wire Warm、ATON Wire Hot

CALIPRI RC220 是一款手持式轮廓测量仪，用于轧材的高精度采样测量。使用 CALIPRI RC220，无需切割和冷却样品就可以评估轮廓。因此，使用光学轮廓测量仪可以更快地校准新轧制的轮廓。该系统可移动，可以快速轻松地从一条轧制线移动到另一条轧制线。 可以用手或通过导向装置将该测量装置放置在轧机机架之间，该测量装置可以在几秒钟内测量仍然很热的产品的轮廓。测量结果以点曲线的形式显示在系统的平板电脑上，并且可以使用预定义的测量规范和模板轮廓评估轮廓。 使用 CALIPRI RC220 进行测量时，传感器会记录所有方向的轧制轮廓，从而可以评估简单和复杂的轮廓形状。测量后，测量结果可以导出为报告或数据文件。